Traditional vs Using an Orion Welder

Soldering is the course of action of signing up for two pieces of metal together. Soldering jewelry entails fusing a filler steel normally identified as solder, into a joint. As an essential part of the jewellery generating procedure, soldering makes it possible for the jewellery makers to simply produce a array of items devoid of melting or detrimental the metals they are performing with.

As with several other parts of jewelry creating, there are the two conventional and present day approaches to different skills and soldering is no exception. In our ongoing effort and hard work to enable you in your jewellery earning journey, we have taken a appear at standard soldering and soldering with an Orion Welder to help you understand how each individual element of the soldering approach can vary.

Re tipping prongs

Conventional – When re tipping a prong if the stone is warmth delicate you will have to consider this out, with multiple stones this can be time consuming and hazard prospective margin for error.

Orion Welder  – You can weld with all the stones in place , go the just one prong again about 1mm permitting home for mechanical tension that the metal is about to impose on the stone. When steel melts, it wishes to be concentric. When welding a prong next to a stone applying the conventional strategy this can possibly place unseen strain on the stone, and could pop a corner.

With Orion you steer clear of

• All of the operate taking the stones out
• The do the job of thoroughly clean up from the fire scale from the conventional strategy of soldering
• Pickling

Resizing rings

Conventional – Will want to take away warmth delicate stones if needed, so you can warmth the full ring and put into practice the solder joint.

Orion welder –  When resizing a ring with an Orion, you can slice the ring, where ever you want, take a triangle file to the new joint, and file a ‘V’ in the ring.  This will make it possible for you to weld in the base of the root, and re-be part of the ring.  Having about a 26 gauge wire, of the identical type of steel that the ring is created of (for colour good reasons) you can lay it lengthwise in the base of the root and weld at a 45 degree angle involving the foundation of the ring and the side of the wire, at about 15ws of vitality.

Warmth amount introduced to a joint will be small making sure that phony stones can endure, you will be in a position to keep the ring at all occasions to keep the control of your work.

Resourceful perform

Traditional – When doing resourceful do the job with solder, you discover you wrapping items in wire to hold it limited.  When heating this up, the head will cause the metallic to shrink or develop in distinctive means that makes the piece go.  Ensuing in acquiring to permit it interesting off, then reset it, and then heat it up once again to do your solder joint.

Orion Welder – The heat influenced zone is so tiny that you can ‘tack’ items jointly with the Pulse Arc mode, so that points are tight in spot.  At this level, those that enjoy solder, can then heat the items up for soldering, without having all of the headache of the wire and the shrinking/growth.

Functioning with Jump rings

Classic – With torch and solder, some leap ring closure is simply just difficult. E.g. when you will need to close a leap ring on a cotton bracelet employing a classic torch and solder it will generate higher danger of burning the complete bracelet.

Orion Welder – The Orion Welder will allow you to weld bear cotton, slate or just about nearly anything sensitive. The heat afflicted zone is just mm letting to shut jump rings or make welds that had been not possible to most prior to.

Whether you’re a starter or qualified, why not give some of our soldering tutorials a go? Just make absolutely sure you have all the jewellery tools and tools you need to get started off. Or, if you’re looking to diversify your skillset more, learn a lot more about the art of stone placing in our blog site or delve into our beginners jewellery soldering round up to get begun.

Save this for later on